Boss FS-6 Footswitch

Boss FS-6 Footswitch Reviews

More Picture

Boss FS-6 Footswitch Feature

• Each footswitch can be assigned latch- or momentary-type
• Stereo input jack for single stereo cable connection
• Can be connected to other footswitches (FS-5L/FS-5U/FS-6/AB-2) for extension
• Can be used with a wide variety of instruments, rhythm machines, guitar amps, etc.

Two switches in one, the Boss FS-6 combines latch- and momentary-type switching into one unit. With two switches conveniently housed side-by-side, the FS-6 allows each switch to be set for sustained or momentary operation. Pick the configuration that best suits your playing style and setup.

Go tO Store Now !!

More Products

• Boss FS-5U Nonlatching Footswitch
• Boss PSA-120S AC Adaptor
• Hosa CSS110 1/4 TRS Interconnect Cable 10 Ft
• Boss RC-30 Dual-Track Loop Station
• The Guitar Wheel

More Reviews

Rubber Amp / Cab Feet, Large Tapered w/ Washers (Pkg 4)

Rubber Amp / Cab Feet, Large Tapered w/ Washers (Pkg 4) Reviews

More Picture

Rubber Amp / Cab Feet, Large Tapered w/ Washers (Pkg 4) Feature

• Rubber Amp / Cab Feet, Large Tapered w/ Washers (Pkg 4)
• 0.75" Tall, * 1.25" Top Width, * 1.625" Bottom Width
• 0.25" Non-Threaded Screw Hole, * 0.625" Screw Head Hole
• Metal Washer insert
• Package of 4

Rubber Amp / Cab Feet, Large Tapered w/ Washers (Pkg 4)
0.75" Tall, * 1.25" Top Width, * 1.625" Bottom Width
0.25" Non-Threaded Screw Hole, * 0.625" Screw Head Hole
Metal Washer insert
Package of 4

Go tO Store Now !!

More Products

• StarTech 1-1/4-Inch Self-Adhesive Rubber Feet for PC Cases RUBBERFEET - 4 Pack - Black
• New Set of 8 Black Rubber Large Speaker DJ PA Cabinet Feet F2
• Penn-Elcom F1691 Rubber Cabinet Foot 1 Dia. x 1 H
• Penn-Elcom 9106 Rubber Cabinet Foot 2.5 Dia. x 1 H
• Fender Replacement Vintage Guitar Amp Handle, Black

More Reviews

Fender Accesories 099-0714-000 Amplifier Accessory

Fender Accesories 099-0714-000 Amplifier Accessory Reviews

More Picture

Fender Accesories 099-0714-000 Amplifier Accessory Feature

• Tilt-back amp
• 14 Inch
• Amplifier Accessory

14 inch tilt-back amp legs kit

Go tO Store Now !!

More Products

• Fender Pickguard Screws

More Reviews

On Stage RS7705 Adjustable Amplifier Stand

On Stage RS7705 Adjustable Amplifier Stand Reviews

More Picture

On Stage RS7705 Adjustable Amplifier Stand Feature

• 11" Support arms with cushions to protect and grip your gear
• 2" Knobs allow for maximum grip and torque when adjusting your stand
• Double clutch disk allows you to remove and rotate the support arm assembly
• 17" Base spread, 1" square tubing and non-slip rubber end caps ensure maximum support

This pro stand features a fully-adjustable tilt angle for precision placement of a wide range of amps, monitors and speaker cabinets. The locking tilt mechanism features 48 teeth for the utmost in security. Its 1" square steel tubing is very strong and holds even large amps. Arms are 12" long, approximately 16" apart and fold down for compact transport. For nearly 20 years, The Music People! Inc. has been on of the nation’s leading suppliers of microphones and pro audio equipment. The Music People! Inc. also owns and manufactures On-Stage Stands® support stands. Founded on a promise of quality, innovation and customer service, The Music People! Inc. is committed to the needs of music professionals throughout the world.

Go tO Store Now !!

More Products

• On Stage RS7000 Stage Monitor or Guitar Amp Stand
• OnStage GS7462B Folding Guitar Stand
• G7th Performance Capo (Six String, Silver)
• On Stage MY325 Dynamic Shock Mount Microphone Clip
• Spectraflex Original Series Right Angle Instrument Cable, 10 Foot, Tweed

More Reviews

JJ Electronics 12AX7 / ECC83 Preamp Vacuum Tube

JJ Electronics 12AX7 / ECC83 Preamp Vacuum Tube Reviews

More Picture

JJ Electronics 12AX7 / ECC83 Preamp Vacuum Tube Feature

• Heritage of superior industrial craftsmanship
• Continues with the new line of Tesla tubes
• Matched triodes and pairs
• Low noise screening
• Does well in guitar amp application with good bite with definition

This 12AX7/ECC83 preamp tube has a well-balanced, colorful tone with strongly defined lows and mids and smooth highs. It allows for more clean headroom than higher gain 12AX7s

Go tO Store Now !!

More Products

• Tungsol 12AX7 Tube
• JJ Electronics EL84 Power Vacuum Tube Single
• JJ 6V6 Vacuum Tube, Matched Pair
• JJ Electronics 12AT7 / ECC81 Preamp Vacuum Tube
• JJ Electronics 6L6GC Power Vacuum Tube Single

More Reviews

Carl's Custom Guitars Volume Box Guitar Amp Attenuator/Power Soak/Plate/Mass/Hot/Pad

Carl's Custom Guitars Volume Box Guitar Amp Attenuator/Power Soak/Plate/Mass/Hot/Pad Reviews

More Picture

Carl's Custom Guitars Volume Box Guitar Amp Attenuator/Power Soak/Plate/Mass/Hot/Pad Feature

• Handmade in USA for 12+ years, over 15000 sold worldwide
• Full moneyback satisfaction guarantee
• Dial in sweeter tones at lower volumes
• Widely expands the range of usable volume of the amplifier
• Helps tame that touchy volume control-your neighbors will love you!

The Volume Box lets you expand your amp's range of usable volume & dial in much more "open" & "driven tube" tones at lower/more manageable volumes (without driving your neighbors crazy!). It adds another much more responsive audio taper volume control to the circuit of your amp by simply plugging into the effects loop, no mods required whatsoever and no danger of harming your amplifier. It solves the problem of an EXTREMELY touchy volume knob on your amp, you know what I mean: zero has no volume but 1 or 2 is already MUCH too loud. The Volume Box takes care of that with its nice smooth Audio Taper Control, DEFINITELY the most cost effective investment you can make for your amp, A great way to discover a whole new range of tones on your amplifier! Simply plug it into the effect loop on your amp (thats the preamp out and power amp in jacks, you need a series effects loop for this device, it does not go between amp and speaker) and turn the amp UP and then adjust the overall volume with the volume box...this allows you to get more of that wide open tube tone at nice safe levels, it really works great! Works on all amplifiers (tube and solid state even) with a standard (series) effects loop regardless of ohm load/power rating/impedance! A must have secret weapon every guitarist should have in their trick bag! Works great live, at home, in the studio, wherever! This box is made of durable molded plastic (see my other listings for my super strong die cast aluminum ones), I use all quality components, very well made and absolutely WILL NOT HURT YOUR AMP! Yes you CAN still use your effects loop for other devices while using the Volume Box, just be sure to place the Volume Box last in the loop and everything will work just fine! Box is very simple to use, no batteries to change or anything like that, just plug and play!!! This is the best bang for the buck you will ever get for your amp! Cables not included, full moneyback satisfaction guarantee, thanks!!!

Go tO Store Now !!

More Products

• Planet Waves Classic Series Instrument Cable with Right Angle Plug, 0.5 feet (3-pack)
• Hosa CFS606 6 Inch Right Angle FX Pedal Cable, 6 Pack
• Ernie Ball Regular Slinky String Set (10 - 46)
• D'Addario EXL110-3D Nickel Wound Electric Guitar Strings, Regular Light, 10-46, 3 Sets

More Reviews

Tungsol 12AX7 Tube

Tungsol 12AX7 Tube Reviews

More Picture

Tungsol 12AX7 Tube Feature

• Exact electrical replica of the rare and desireable Tung Sol 12A7 from the 1950s
• Great tone and break-up characteristics for viintage and modern guitar amps
• Long lasting and reliable - 15% higher gain than standard 12AX7
• Low noise and low microphonics - Hand selected and tested
• 90 Day replacment warranty on all tubes

The 12AX7 Tungsol has high gain, ultralow microphonics and superb linearity. The sound of this tube is full and musical.

Go tO Store Now !!

More Products

• JJ Electronics EL84 Power Vacuum Tube Single
• JJ Electronics 12AX7 / ECC83 Preamp Vacuum Tube
• Tung-Sol 6V6GT Vacuum Tube
• JJ 6V6 Vacuum Tube, Matched Pair
• Sovtek 12AX7LPS Vacuum Tube

More Reviews

Nanuk 3 Part Foam Inserts for 930 Nanuk Case

Nanuk 3 Part Foam Inserts for 930 Nanuk Case Reviews

More Picture

Nanuk 3 Part Foam Inserts for 930 Nanuk Case Feature

• 3 part cubed foam insert.

Made of high quality polyurethane foam, the multi-layered set of customizable inserts includes a pre-scored removable layer. This layer consists of foam squares that can be removed in various configurations to accommodate the contents of the case. This solution is ideal if you are seeking a quick and easy way to protect and organize your items.

Go tO Store Now !!

More Products

• Nanuk 3 Part Foam Inserts for 940 Nanuk Case
• Music People SSB6500 Music People SSB6500 Carry Bag for Speaker Stands or Microphone Stands
• Nanuk Shoulder Strap for Nanuk Case
• Butler Creek Lula Universal Pistol Loader
• Nikon EN-EL15 Rechargeable Li-ion Battery for Nikon D7000 and V1 (Retail Packaging)

More Reviews

MKP Audiophiler Capacitor, Metallized Polypropylene, 3.3uF - 400V

MKP Audiophiler Capacitor, Metallized Polypropylene, 3.3uF - 400V Reviews

More Picture

MKP Audiophiler Capacitor, Metallized Polypropylene, 3.3uF - 400V Feature

• MKP Audiophiler caps are upgrade caps for guitar amps and other audio equipment
• 3.3uF - 400V
• Metallized Polypropylene, Axial Type, Solder Leads
• 0.80"D x 1.25"L

MKP Audiophiler caps are inexpensive upgrade caps for guitar amps and other audio equipment. 3.3uF - 400V. Metallized Polypropylene. Axial Type, Solder Leads. 0.80"D x 1.25"L

Go tO Store Now !!

More Products

• MKP Audiophiler Capacitor, Metallized Polypropylene, 6.8uF - 400V
• MKP Audiophiler Capacitor, Metallized Polypropylene, 10uF - 400V
• MKP Audiophiler Capacitor, Metallized Polypropylene, 4.7uF - 400V
• MKP Audiophiler Capacitor, Metallized Polypropylene, 2.2uF - 400V
• MKP Audiophiler Capacitor, Metallized Polypropylene, 1uF - 400V

More Reviews

Pyle-Pro PPHP898A 400 Watts 8'' 2-Way Plastic Molded Powered/Amplified Speaker System

Pyle-Pro PPHP898A 400 Watts 8'' 2-Way Plastic Molded Powered/Amplified Speaker System Reviews

More Picture

Pyle-Pro PPHP898A 400 Watts 8'' 2-Way Plastic Molded Powered/Amplified Speaker System Feature

• 8''Subwoofer - Master Volume, Bass & Treble Control - 35mm Speaker Stand Mount
• 1'' Titanium Compression Driver - Output: 400 Watts Peak/ 200 RMS - Power: AC 115- 220 Voltage Selectable
• XLR Mic Input - Frequency Response: 45Hz-20Khz - Dimensions: 13.8''W X 11.8''D X 19.3''H
• XLR & Stereo RCA Line Input - Metal Grill to protect the woofer / Plastic Cabinet
• XLR Line Output - Crossover Frequency: 3.0Khz

The PPHP898A is a powered, wide-coverage, two-way loudspeaker boasting 400 watts of full-range, distortion-free power. It pushes everything from pounding bass to a chirpy high-end, all in one amplified cabinet. This speaker comes equipped with an XLR mic, ¼” mic, and stereo RCA line inputs to accommodate both voice and any electronic instrument simultaneously. Adjust the sound to your own specifications using the bass and treble controls. The 1.75” state-of-the-art titanium compression drivers and 15” subwoofer are protected by a metal grill, so you know your sound is secure. It has a 35mm pole mount socket for a multitude of applications. You’ll get crystal-clear acoustics in your home as a monitor. It’s also ideal for bands and DJs as a main PA or instrument amplification system, so you can rock the audience anywhere, at the club or a party. And you’ll always be ready for the next gig – these speakers are compact enough to be truly portable, and they come with a handle for carrying.

Go tO Store Now !!

More Products

• PYLE-PRO PSTND2 - 6.5 ft. Tripod Speaker Stand
• Pyle-Pro PPHP893 400 Watt 8'' 2-Way Plastic Molded Loudspeaker System
• Pyle PMDK102 Pro Audio Speaker Stand and Cable Kit
• Pyle-Pro PPHP1098A 600 Watt 10'' 2-Way Plastic Molded Powered PA speaker System
• Pyle-Pro PSTK103 Heavy-Duty Aluminum Anodizing Dual Speaker Stand with Traveling Bag Kit

More Reviews